APPLESLICE V2 WING FOIL BOARD

Appletree’s most versatile wing foil board 

Why choose between flat water, waves or freestyle when you can do it all on one board? The Appleslice Wing V2 is an evolution of Appletree’s popular Appleslice model although they have refined the shape quite a bit for version 2.

The Slice V2 is primarily designed for both flat water and wave riding but that doesn’t mean you can’t jump and try freestyle tricks with it as it’s actually more than capable of that as well!

(However, if you are after a pure freestyle board, have a look at the  Jazz Wing Appletree’s freestyle wing model).

Pick your size 

The Appleslice caters to a broad audience of riders. The range starts at a very low volume that can also be used as a prone foil surf board or for accomplished riders that can get away with limited volume.

Going up in the volume range, the boards get increasingly easier to ride. And the range tops out at a 110L in 5’7 length, ideal for heavier riders in low wind conditions.

Key board features

Compact shape

The Appleslice V2 has a relatively compact shape. It’s not as short as the Jazz, but still quite compact although the Appleslice is much narrower. This helps when wave riding and racing if you hit the water with the rail when racing upwind or making tight turns. Through the range the increments are around every 10L so we offer sizing that caters for everyone.

Hull entry

The entry shape of the Appleslice V2 is quite unique. It features a boat hull type bottom that quickly flattens out under the front foot. Similar to a race boat, this hull shape helps deflect the water when accelerating. It increases the efficiency of the bottom and you will notice that the board gains speed very easily, meaning you can comfortably ride a size smaller in volume.

Elongated planing surface

After the hull entry, the bottom flattens out to provide a stable planing surface. The tail of the Appleslice V2 is straight with a hard edge at the end. This bottom is ideal for accelerating and releasing off the water getting you on the foil quicker.

The foil tracks are placed slightly forward to accommodate the use of newer high aspect foils that work better when placed more at the front. The rails of the Appleslice V2 are bevelled to help deflect the water on touchdown.

Front foot recess standing area

You will see our unique recess feature across the Appletree Surfboards foil range. This ensures that the angle between the standing area and the foil mast remains at 90 degrees, yet still allows us to change the angle between the bottom and the foil mast.

You want the bottom to have an angle slightly over 90 degrees as this helps the board gain speed as well as deflect the board back up if you touchdown. What you do not want is to have the standing area over 90 degrees as it would give you the feeling of standing on a slope meaning you will have less control over the foil.

Natural volume distribution

The volume in the Appleslice V2 is distributed evenly over the shape, making it easy to balance when on the knees. Once on the foil, the board feels balanced and is easy to turn and manoeuver. In the bigger sizes, this board is very easy to control when you are still learning, while the smaller sizes allow the board to improve your riding.